High Accuracy Temperature Probes

Connect directly to any Pace Data Logger.  All probes utilize a precision 30k ohm thermistor with 0.1 deg. C interchangeability.

PT900 series Temperature Probes - Pace Scientific

PT900 Series Temperature Probes

Connect up to eight probes to the XR5-SE Data Logger, and up to four probes to the XR440 or XR450 Data Logger. 

Common to all PT900 series Probes

  • 0.1°C Interchangeability from 0°C to 70°C
  • Resolution 0.02°C at 25°C
  • No calibration required
  • Probe cables may be extended using ordinary copper wire.


PT916

PT916 Stainless Steel Temperature Probes - Pace Scientific

PT916 Probe, available in 4" and 6" lengths

Closed end 1/8 inch diameter stainless steel tube.  Teflon insulated 24 gage leads. Suitable for liquid or gaseous immersion, refrigeration and general temperature applications. Can be inserted into a 'Pete's Plug'.  Available in 4 inch (102 mm) and 6 inch (153.4 mm) lengths.   A bored-through compression fitting is available (see below).

Temperature range

-50 to 75°C (-58 to 167°F) continuous duty

Intermittent duty to 150°C (302°F)

Lead length 3 feet (0.9 meters)
Interchangeability ±0.1°C from 0 to 70°C (32 to 158°F)

Total system accuracy

±0.15°C from 0 to 40°C (±0.27°F from 32 to 104°F)

±0.3°C from -25 to 85°C (±0.55°F from -13 to 185°F)

Time constant (typical) in stirred oil bath 3.0 seconds

 

PT916 Temperature Probe

Part No. Sheath Length Price
PT916-4 4 inches (102 mm) $56.
PT916-6 6 inches (152 mm) $60.

CF916-1/8

CF916-1/8 Compression Fitting

Bored-through stainless steel compression fitting for PT916 probe. 1/8 NPT male threads. 1.2 inches in length (30.5 mm).

CF916-1/8 price:  $20.


PT960

PT960 Immersible Temperature Probe - Pace Scientific

Rugged stainless steel probe 6 mm (0.236") diameter and 50 mm (approx 2 inch) length with 6.1 meter (20 ft) cable.  TPE jacketed cable has diameter of 3.3 mm (0.13"), round cross section and 24 gage, polypropylene insulated leads.  Suitable for immersion, HVAC, and soil burial applications.  Probe's cable not recommended for immersion in fuels (fuel splashing on cable is OK).

Temperature range -40 to 100°C (-58 to 212°F)
Cable length 20 feet (6.1 meters)
Interchangeability ±0.1°C from 0 to 70°C (32 to 158°F)

Total system accuracy

±0.15°C from 0 to 40°C (±0.27°F from 32 to 104°F)

±0.3°C from -25 to 85°C (±0.55°F from -13 to 185°F)

Time constant (typical) in stirred oil bath 6 seconds
IP (Ingress Protection) Rating: IP68

PT960 price:  $90.


Extension Cable

Extension cable can be spliced to any of the above probes.  We recommend 24 gauge two-conductor stranded copper cable for extensions of up to 100 feet (30 meters).  For longer extensions, 22 gauge cable is recommended.  Acceptable splicing methods include wire nuts, crimp connectors, hand twisting and taping, or solder.  For cable runs longer than 30 feet, we recommend using shielded cable (Belden 9501 or equivalent).


All Temperature Sensors and Probes

XR450 Data Logger

pdf icon  XR450 Catalog


XR5-SE Data Logger

pdf icon  XR5-SE User's Guide


Placing an Order